home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Network Supervisor's Toolkit
/
Network Supervisor's Toolkit.iso
/
novell
/
fyi8
/
08014.dos
< prev
next >
Wrap
Text File
|
1996-07-10
|
940b
|
21 lines
Subject: Setting DMA on Novell Ethernet NE1000 Cards
Date: December 29, 1987
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
GENERAL
INFORMATION: We obtained the following information from Mary at SCS Tech
Support:
To Set the NE1000 card to function with DMA,
DMA 1: jumpers 1 & 3 in the DMA Section
DMA 3: jumpers 2 & 4 in the DMA section
Refer to the NE1000 Installation Supplement to locate the DMA
block of jumpers; the above positions are from the left (the
IRQ jumper block). Page A-4. The IRQ block takes 4
positions, DMA block 4, I/O address 2 positions.
The information was requested by a customer who had bought
NE1000 cards to use in a Banyan LAN (our advice was to sell
the customer a Netware OS!).